The Base Station has the longest battery life of the other elements of the WES3 system, aligned with wireless mobility and durability.
- Includes programming functions, so you can edit site name and SMS numbers directly from your Base Station.
- Real time System Log records activations and warnings, so you can monitor activity and history across your whole WES3 system.
- GSM version available, enabling up to 6 users to receive configurable SMS notifications of alarm, tamper or system faults.
- Access code protection of all system settings and alarm reset for maximum accountability
- Unit numbering, enabling easy identification of activated units directly from the base station
- Recent events logged in memory for Health and Safety audit procedures
- 3 to 5 year Battery life (under normal usage conditions), reducing lifetime costs and need for constant replacement.
One of the leading innovations of the WES3 system is the introduction of the integrated Medical Alert alarm, and it can be activated manually from any WES3 call point, alongside the firm alarm, creating an even safer site.
- Integrated siren and manual call point with optional built-in strobe for high visibility.
- Battery life tested to 3+ years, reducing lifetime costs and need for constant replacement and improving compliance with waste regulations.
- Unit numbering to aid pinpointing of triggering unit in the event of an alarm. Add, remove and clone units in a few button presses.
- Transit mode to allow safe removal and storage without any risk of activation.
Provide 24/7 protection to your site by adding heat detectors to your WES3 solution. These units include specialist smoke, dust-resistant smoke and heat detectors.
Detection units are silent and connect directly to the WES3 system to activate the fire alarm system across the site in the event of fire.
- Minimum 3 years’ battery life, externally tested for normal usage conditions, reducing lifetime cost
- Activated unit flashes red LED for 30 minutes after activation to enable easy identification
- Ceiling mounted and suitable for internal use
- Heat, smoke and dust resistant detector heads available
Provide 24/7 protection to your site by adding smoke detectors to your WES3 solution.
- Detection units are silent and connect directly to the WES3 system to activate the fire alarm system across the site in the event of fire.
- Minimum 3 years’ battery life, externally tested for normal usage conditions, reducing lifetime cost
- Activated unit flashes red LED for 30 minutes after activation to enable easy identification
- Ceiling mounted and suitable for internal use
Heat, smoke and dust resistant detector heads available
All detectors act as an early warning of fire risk and link to mesh radio network of your overall WES3 solution, maximizing your site safety.
The WES3 Interface unit allows you to connect your network to other systems, commonly access control, to aid efficiency and general protection across the site.
- Input: Connect so that the WES3 fire alarm system can be triggered to sound the alarm by an external system
Output: Connect so that the WES3 system going into alarm triggers an action on the part of an external system, e.g. auto dialer or access control
Please note: The Interface cannot be connected directly to the mains current, and you will need a suitably qualified person to wire together the units.